LIST OF FUNCTIONS
1. Read/Renew ECMID Honda Kline
2. Read/Write T5 Chip Piaggio/Vespa
3. Remap Yamaha (Open ECU/ECM)
4. LED System Testing/Activation Kit
5. Sensor Signal Simulation Accessory Kit; Sensor And Actuator Testing
6. Remap Yamaha Kline (Applicable For Customers Upgrading From Versions H+, O+, F+, G, R+)
7. Program Smart Key For Yamaha Tmax
8. Renew ECU/ECM Yamaha Tmax (B7M, BBW, BBV, etc.)
9. Advanced ODO Function (ODO Calibration In ECU/ECM For NMAX, AEROX, NVX 2021, etc.)
10. Yamaha 2025 Smartkey (GRANDE, XMAX, NMAX 2025 With Scu Code BKA, etc.)
11. Smartkey Function For Piaggio/Vespa
12. Read ESLID From The Steering Lock Via 6-Pin Connector (XADV, FORZA 750, CBR1000RR, etc. From 2021 Onwards)
13. Remap Suzuki
1. Read/Renew ECMID Honda Kline - Option 1
- Read ECMID in ECM via DLC connector
- Reset ECMID in ECM via DLC connector
- Renew ECM via DLC connector on vehicles equipped with a smartkey system
- Support for reading KEYID via K-Line to program additional keys when all keys are lost
- Support ECM codes from Honda manufactured by Shindengen and Keihin
- Support Honda ECM codes up to the year 2025
- Connect to the diagnostic DLC connector via K-Line without unlocking ECM
- Support for nearly 200 ECM codes from Honda
2. Read/Write T5 Chip Piaggio/Vespa - Option 2
- Chip programming for Piaggio/Vespa vehicles
- Read KEYID from T5 chip
- Load chip data for Medley vehicles
- Change KEYID in T5 chip
3. Remap Yamaha (Open ECU/ECM) - Option 3
- Increase engine RPM limit up to 14,000 RPM
- Remap to enhance engine power
- Applicable for stock vehicles and modified vehicles with throttle body upgrades, air filters, big bore kits, exhausts, injectors...
- Provides smoother acceleration, offering a unique driving experience
- All maps undergo thorough testing
- Supports ECMID reset for vehicles with Smartkey systems
- Currently, ECM unlocking is required for these models
- Supports vehicle models from Vietnam, Thailand, Indonesia...
4. LED System Testing/Activation Kit - Option 4
- Activate LED lighting system
- Support for checking the LED system
- Supports Honda and Yamaha brands
5. Sensor Signal Simulation Accessory Kit; Sensor And Actuator Testing - Option 5
- Battery Check: Quality, capacity, charging system
- Sensor Quality Assessment: CKP, TP, ECT/OCT, MAP, IAT
- Speed Sensor Check: VSS, VS, WS
- Measure Coil Peak Voltage
- Simulate Sensor Signals: MAP, ECT, OCT, TP, TW, O2
- Simulate Control Signals: Coil, injector, idle air control valve (IACV/ISC), solenoid valve
6. Remap Yamaha Kline - Option 6
- Remap to adjust air-fuel ratio (A/F)
- Remap to adjust ignition timing
- Remap the original ECU software
- Remap specific ranges to increase engine performance
- Disable SMARTKEY in ECM
- Free updates for the list of new supported vehicles (View the supported list here)
7. Program Smart Key For Yamaha Tmax - Option 7
- Program additional keys when all keys are lost
- Program additional keys
- Delete/OFF lost keys
- Check synchronization between key and smartkey controller
- Read KEYID code from SCU controller
- Read KEYID code from lock controller
- Add key when ID code is still available
- Copy/restore original data in SCU
8. Renew ECU/ECM Yamaha Tmax (B7M, BBW, BBV, etc.) - Option 8
- Read ECMID code in ECM
- Reset ECMID code in ECM - Renew ECM
- Connect to ECM via ECM opening connected to MCU
- Image of connection instructions and opening location on ECM
- Reuse when ECM when ECM no longer has ECMID code
- Support synchronization of SCU and ECU when replacing SCU
- Support ECM code of YAMAHA TMAX: B7M, BBW, BBV (TMAX – MT09)
9. Advanced ODO Function (ODO Calibration In ECU/ECM For NMAX, AEROX, NVX 2021, etc.) - Option 9
- Read current values in ECM
- Set standard ODO values in ECM
10. Yamaha 2025 Smartkey (GRANDE, XMAX, NMAX 2025 With Scu Code BKA, etc.) - Option 9
- Program an additional key when the original key is available
- Delete/OFF lost or dropped keys
- Program a new key when all codes and original keys are lost
- Check and synchronize the key with the smartkey control unit
11. Smartkey Function For Piaggio/Vespa - Option 10
12. Read ESLID From The Steering Lock Via 6-Pin Connector (XADV, FORZA 750, CBR1000RR, etc. From 2021 Onwards) - Option 11
13. Remap Suzuki - Option 12
- Automatically select the MAP that adds fuel and ignition according to the vehicle configuration, including upgraded air filters, exhaust, and 10-hole injectors
- Increase full throttle limit to 14,500 - 15,000 RPM
- Eliminate issues like sluggish response, weak engine, and lack of power during sudden acceleration
- Fix throttle lag and jerking at 20-30 km/h, particularly for Raider and Satria models
- Pre-configured MAPs with optimized air-fuel ratios (A/F), tested on both Dyno and real-road conditions
OPTIONS | OPTIONAL FUNCTIONS |
Option 1 | Read/Renew ECMID Honda Kline |
Option 2 | Read/Write T5 Chip Piaggio/Vespa |
Option 3 | Remap Yamaha (Open ECU/ECM) |
Option 4 | LED System Testing/Activation Kit |
Option 5 | Sensor Signal Simulation Accessory Kit; Sensor And Actuator Testing |
Option 6 | Remap Yamaha Kline (Applicable For Customers Upgrading From Versions H+, O+, F+, G, R+) |
Option 7 | Program Smart Key For Yamaha Tmax |
Option 8 | Renew ECU/ECM Yamaha Tmax (B7M, BBW, BBV, etc.) |
Option 9 | Advanced ODO Function (ODO Calibration In ECU/ECM For NMAX, AEROX, NVX 2021, etc.) And Yamaha 2025 Smartkey (GRANDE, XMAX, NMAX 2025 With Scu Code BKA, etc.) |
Option 10 | Smartkey Function For Piaggio/Vespa |
Option 11 | Read ESLID From The Steering Lock Via 6-Pin Connector (XADV, FORZA 750, CBR1000RR, etc. From 2021 Onwards) |
Option 12 | Remap Suzuki |